Tag: Cleaning Mold

My Home Has a Mold Problem! Now What?

Published on

 

So, you’ve had a professional mold testing done in your house and your worst suspicion has been confirmed. The very thought of this issue can strike fear into the heart of even the toughest homeowners. However, you can no longer deny the fact and it’s time to take some action. So, say it with me: My home has a mold problem! Now that you have accepted the worst, the experts at RestoPros are here to help with some advice about what you can do from here.

 

Supplies for Treating the Mold

In serious mold cases, most experts would recommend having professional mold remediation. However, if your professional mold testing expert has verified you can clean it yourself, here are some supplies you will need:

  • Protective Gear 

    You should have a mask or respirator, eye protection, rubber gloves, a fan, and a dehumidifier. You do not want to risk inhaling the mold spores you will be cleaning.

 

  • Cleaning Chemicals 

    If the intense list of protective gear was not a clear indication, mold is not something you can clean with everyday cleaning supplies. On the contrary, you will need to procure non-ammonia detergent, chlorine bleach, and white vinegar to mix your cleaning solution.

 

  • Cleaning Tools 

    Make sure you have plenty of rags and more than one scrub brush (both of which should be disposed of after you finish treating the mold). You should also have a large pail and a plastic garbage bag.

 

Steps for DIY Mold Treatment

1. Dampen the Area:

This is an important first step to keep mold spores from releasing into the air. With a damp rag soaked in plain water, coat the affected area.

 2. Remove as Much Mold as Possible:

With your scrub brush and detergent, remove as much of the mold as you can, and dispose of the brush.

 3. Mix and Apply Your Bleach Solution:

In your large pail, mix together 1 ½ cups of chlorine bleach to 1 gallon of water. Use a new rag to generously coat the affected surface with this mixture. Once this is done, let it soak for 15 minutes.

 4. Scrub the Solution into the Affected Area:

With a new scrubbing brush, scrub the area with the bleach solution thoroughly and rinse with clean water. Repeat this bleach step until all visible mold is gone.

 5. Eliminate All Moisture from the Treated Area:

Use your fan and dehumidifier to dry the area thoroughly to prevent new mold growth.

 6. Wash Your Clothes:

Unless you chose to wear work clothes that you don’t mind disposing of, wash the clothes you wore for the mold treatment immediately. Place them in a plastic bag to transport them to the washing machine. Add ¾ cup white vinegar to the water to kill the mold spores on your clothing.

 

My Home Has a Mold Problem! What Else Can I Do?

If you have followed the previous steps and removed the mold on your own, you have already saved money on professional mold removal. The best thing you can do for the long-term safety of your home is to enlist the help of mold remediation experts you can trust. Let the knowledgeable team at RestoPros take it from here. Call us at (855) 587-3786 or fill out a service request form online to conquer your mold problem today!

 

Common Mold vs Black Mold

Published on

Common Mold vs Black Mold

The irritation in back of your throat has gotten worse. You also bought some eye drops, because your eyes have been red and itchy lately. It was a wet October here in Dallas this year. You’ve even had some water damage in the house, but it was minor – or so you think. You pull back the corner of the carpet in the bedroom where the leak was the worst and see black colored mold.

 

Like some vampire from an old movie, you immediately cover your mouth and nose with your arm and run out the room. Does the color of the mold mean you’re in danger? Fortunately for you, the professionals at RestoPros – the leading mold and water remediation company for the greater DFW Metroplex – are going to teach you the differences between common mold and black mold.

  1. Molds Defined.

There are several types of mold that are black colored. Some of these molds are toxic and some are not, and not all toxic molds are black. Generally speaking, mold is the visual growth produced by filamentous fungi. Mold is sometimes confused with bacteria, but unlike bacteria, mold is a eukaryote organism with a complex cell structure. Mold serves an important role in the ecological system as a decomposer – and in some cases – mold is responsible for saving more lives than it has taken.

 

  1. Is Black Mold Dangerous?

While black mold can be harmful to humans, its reputation as a deadly killer is somewhat overhyped. In fact, according to the Centers for Disease Control and Prevention, calling black mold toxic isn’t even accurate. Some molds are indeed toxigenic and can produce mycotoxins, but the molds themselves aren’t toxic or poisonous. While black mold is definitely harmful to humans, the simple fact is there are very few links that suggest that toxigenic black mold found inside the home can cause any serious risk to your health. Black mold is mainly a problem for those with underlying medical issues like asthma or a who have a weakened immune system.

 

  1. How Common is Mold?

Mold isn’t just common – it’s ubiquitous. You will never completely rid your home of mold. Mold will happily grow anywhere this is moisture inside of the home, especially in areas like bathrooms, kitchens, and basements where moisture is constant companion. The most common types of mold you’ll find in your home are Cladosporium, Penicillium, Aspergillus, and Alternaria. While Stachybotrys chartarum (black mold) is a less common problem for homeowners, it’s far from rare.

 

  1. What Do I Do If I Find Mold?

While black mold probably isn’t going to kill you, you should take steps to get rid of it. Molds that are on hard surfaces can usually be taken care of with a good cleaning. There are several store-bought cleaners that do a reasonably good job of this, but bleach is still the best method. Mix 1 cup of bleach with 1 gallon of water and pour this mixture into a spray bottle. Molds found on porous materials like drywall, carpet, and ceiling tiles will need to be thrown away.

 

While we hope this information will give you a better understanding of mold and the risks it creates inside the home, it is no substitute for an experienced professional. The fact is, proper mold removal may be too difficult and dangerous for the average homeowner. The CDC recommends calling a professional mold remediation company in most cases. The mold remediation experts at RestoPros have a long-standing reputation for expertise, professionalism, and hard work. If you’re looking for a skilled and highly trained technician for mold testing, mold remediation, water damage restoration, or HVAC duct cleaning anywhere in the Dallas Metroplex, call us at (855) 58-RESTO (855-587-3786) to schedule your appointment today!

 

 

4 DIY Tips on Removing Black Mold

Published on

Your eyes have been watery and itching lately, and you’ve been coughing and sneezing more than normal. There has also been a musty, unpleasant smell that, regardless of how many candles you burn, just won’t go away. You then notice a fuzzy little greenish-black patch of slime in the bathroom. You, my friend, have a toxic invader: black mold. A serious threat to homeowners, black mold can wreak havoc on your home and health.

Black mold is found in the dark and damp areas of your home and, left unchecked, can quickly spread and become a serious threat to you and your loved ones. Fortunately for you, the professionals at RestoPros – the leading mold and water remediation company for the greater DFW Metroplex – are going to show you 4 DIY tips on removing black mold.

  1. Gear Up for Battle

Before you confront the enemy, make sure you’re properly outfitted and ready for battle. For under $10.00, hooded disposable coveralls will protect you and your clothing from mold spores. You will also need a high-quality N-95 respirator, air tight safety googles, and a pair of good rubber gloves. Because the health concerns are so serious, we must insist that no short cuts are taken. Even short exposure to black mold spores can cause respiratory infections, joint pain, rashes, and even blindness.

  1. Remove and Toss Porous Materials.

Any porous materials with mold growth will need to be removed and discarded. This can include materials like drywall, paper, carpeting, and ceiling tiles. Because mold can spread rapidly, it’s important to check behind walls with mold grown on them to see how far the infection has spread. This might mean having to remove large sections of drywall and carpeting to ensure all black mold is found and treated. While wooden studs can be treated and cleaned, drywall will need to be discarded and replaced after the mold is eradicated from the area. This holds true for all carpeting as well. Hardwood floors may be cleaned, but the carpeting will need to be removed from the home.

  1. Disinfect and Clean the Area.

There are a number of inexpensive products on the market that can be used to clean mold. For years, products like bleach or ammonia have been the preferred choice, but today there are several products that are made especially for the removal and cleanup of mold and can be purchased at any major grocery store. However, according to the Centers for Disease Control and Prevention, bleach may still be the most effective way to remove mold from the home. If you decide to use bleach, mix 1 cup with 1 gallon of water. Pour into a spray bottle or use with a bucket and sponge. Never mix bleach and ammonia, as it produces a toxic gas.

  1. Prevent Mold Growth from Reoccurring.

Make sure that the root cause for the moisture has been fixed. Places like bathrooms, kitchens, and basements need to be cleaned regularly and kept dry. For large areas like basements, a dehumidifier will allow you to regulate the amount of moisture in the air. Air conditioners are another good way to reduce humidity in the home. In areas where it is difficult or impossible to eliminate moisture, you can mix 1 cup of bleach with 5 gallons of water for use in controlling the growth of mold.

 

While we hope these DIY tips help in your battle with black mold, they’re no substitute for an experienced professional. The fact is, the job may just be too difficult and dangerous. The CDC recommends calling a professional mold remediation company in most cases. The mold remediation experts at RestoPros have a long-standing reputation for expertise, professionalism, and hard work. If you’re looking for a skilled and highly trained technician for mold testing, mold remediation, water damage restoration, or HVAC duct cleaning anywhere in the Dallas Metroplex, call us at (855) 58-RESTO (855-587-3786) to schedule an appointment today!

 

Treating Mold in Clothes

Published on

Finding mold in your clothes can be very unsettling. But don’t think you have to throw them out. There are certain techniques that can help remove mold spores stuck in fabrics. By following the right steps, you may be able to save your clothes from the clutches of mold!

RestoPros advises every Dallas/Ft. Worth homeowner to follow these steps on treating mold in clothes. Use our guide below to help freshen up your wardrobe in the case of an infestation.

Acquire Mold Cleaners

In order to treat mold in clothes, you’ll need to know what can effectively clean and kill it. Previously, we have discussed mold prevention products you can use in your home. While not all these items may be suitable for your clothes, here are a few we do recommend:

  • Lemon Juice
  • White Vinegar
  • Borax
  • Baking Soda

These products all have mold killing properties (aside from baking soda, which is more of a deodorizer). You can utilize any of these when treating mold in clothes. But be aware letting them sit in fabric for a long period of time can lead to discoloration. You’ll need to thoroughly rinse clothes in the washing machine after using a mold cleaner.

Note: Bleach is also an effective mold killer and can be used to treat mold in clothes. However, this can ruin the color of fabrics, and is recommended to only use on white, plain clothing. Check if any of your clothes have a “Do Not Bleach” label on their tags as well.

For more information on natural laundry stain removers, click here.

Gather all Mold-Infested Clothing

After acquiring a mold cleaner, the next step is to isolate any clothing infected with mold. Separate any mold-infested clothing in a pile away from unaffected clothing. Be sure you grab every piece of attire affected by mold. Even ones that have small, almost negligible mold stains should be separated. Mold reproduces rapidly and can spread to other clothing under the right conditions.

Wash Clothes Using the Mold Cleaner

Fill your washing machine with the mold-infested clothes. Use a lighter amount of detergent than normal, as you will be utilizing a natural mold cleaner.

Start the load and wait for the washer to fill up with water. The water temperature depends on the cleaner being used. Once the washer is filled, add the mold killing product of your choice. Measurements and temperatures are as follows:

  • Lemon Juice – ½ Cup, Warm Water
  • White Vinegar – 1-2 Cups, Warm Water
  • Borax – ½ Cup, Hot Water

Note: Only use hot water for clothes that can handle the temperature. Failing to do so can damage your clothing.

Scrub Away/Rewash Clothes to Remove any Remaining Stains

After a wash cycle, remove and scrub any remaining stains on your clothing. Mix baking soda with water to create a solution that helps scrubbing and deodorizing your clothes. If stains are still prolific, you may need to run another load. Continue doing so until stains appear removed.

Dry Clothes Properly

To ensure mold has been removed, you’ll need to dry your clothes properly. Using a drying line or rack, hang your newly washed clothes in a location with sunlight. If your clothes have not been dried after 24 hours, throw them in the dryer.

Never let mold take your clothes without a fight! While we recommend treating mold in your clothes using these DIY tactics, you will need to contact a professional if mold infests your home. Contact RestoPros for affordable mold remediation services. Call us at 855-587-3786 to schedule an appointment with your Dallas/Ft. Worth mold removal experts.

8 Best Mold Prevention Products for Your Home

Published on

Preventing mold growth in your home is more of a holistic endeavor and not something that can be achieved by simply cleaning an outbreak with paper towels and soap. Although you may seemingly wipe away the area to prevent initial mold growth, spores can still thrive and begin ravaging your home. Instead of using up all your soap, consider these mold prevention products for your Dallas/Ft. Worth home. The experts at RestoPros recommend having these products on standby, as using a combination of these products during your spring cleaning can prevent mold from ruining your home, as well as attack any present growth.

Home Air Purifier

Cost: $60-900

As their name suggests, air purifiers clean the air, removing contaminants and mold spores by passing them through a HEPA filter. Air purifiers work well to prevent mold growth by keeping airborne spores from finding a suitable environment in your home. They are best placed in bathrooms and kitchens, as well as near the corners, doors, and furniture of other rooms. Available in portable and whole-home sizes, air purifiers kill spores and halt mold growth.

Home Dehumidifier

Cost: $30-300

A dehumidifier reduces humidity levels within a nearby area and removes unforeseen moisture build-up in your home. Mold requires a dark, warm, and humid habitat to grow and reproduce, and a dehumidifier prevents this habitat by removing moisture. Dehumidifiers run quietly and without interrupting your daily activities and are available in different sizes to accommodate each room of your home.

Borax

Cost: $1-20

Also known as sodium tetraborate, borax is an odorless mineral that is used as a natural pesticide and a household cleaner, as well as being a prominent mold killer. Relatively cheap to purchase and found at almost any supermarket, borax provides the compounds to protect areas from mold growth, as well as killing existing mold. Borax can be found in laundry detergents, stain removers, and other cleaning products, and can also be purchased by itself. Combining borax with other soaps during mopping and cleaning adds a protective layer against mold growth in your home.

Baking Soda

Cost: $.75-10

Baking soda is a staple in most homes, but do you know of its mold prevention properties? Baking soda provides the means to both kill and prevent mold growth in your home without being harmful to kids or pets. Baking soda also acts as a deodorizer, eliminating foul odors within a nearby area. As a rule, you should keep an open box of baking soda in your fridge and consider mixing a tablespoon of baking soda in a spray bottle with water to act as a quick mold killer.

Hydrogen Peroxide

Cost: $1-4

Much like baking soda, hydrogen peroxide is a multi-use tool, possessing both medicinal and cleaning properties. As an effective alternative to bleach, hydrogen peroxide actively kills mold and works well as a prevention agent. One essential benefit of hydrogen peroxide is its ability to thoroughly clean porous surfaces, something bleach cannot do. Use hydrogen peroxide to clean porous surfaces such as drywall and prevent mold from residing in these vulnerable areas.

White Vinegar

Cost: $2-25

White vinegar is a deadly foe against mold, being able to kill over 80% of all mold species. Much like hydrogen peroxide, white vinegar can clean porous surfaces such as drywall and prevents mold from forming in your home. Simply combining white vinegar with baking soda, water, and soap will offer an extensively beneficial cleaning agent that coats your home with mold-protection properties.

Drain Snakes

Cost: $6-25

A common cause of mold growth is from water damage, often coming from your plumbing. Clogged pipes have a chance to burst, causing leakage and eventually mold growth. A drain snake works to unclog your plumbing and stops build-up from bursting your pipes. When cleaning bathrooms and the kitchen, slide a drain snake down your sink to remove build-up and prevent mold growth.

Lemon Juice

Cost: $2-10

Besides making lemonade, lemon juice also is a strong mold killer! The high amount of citric acid prevents mold from sticking to covered surfaces and provides a natural scent to kill foul odors.

Using these prevention products will help keep your home mold-free. However, If your home is already dealing with an outbreak, contact RestoPros immediately. Our mold remediation services will remove any mold in your Dallas/Ft. Worth home, and our professionals will guide you on preventing mold growth for years to come.  Give us a call at 855-587-3786 to schedule an appointment and get started.

Washing Mold From Clothing

Published on

The humid Dallas summer guarantees that most people who to leave their home during the day will return with damp clothing. Just a few minutes in a hot car can drench someone in sweat during a hot afternoon. This can lead to problems for people who leave clothing in a stuffed hamper for several days. Any fabric that is left wet or damp for more than 24 hours can easily develop mold growth. The humid Texas air can also exacerbate a mold problem in clothes, especially if your home has a humidity level over 50 percent. Last week we shared tips on getting rid of mold odor in clothing and accessories. This week we’re looking at tackling mold itself, which is even trickier to get off fabric once it has started to grow. Mold can destroy clothing, so the sooner that you act on getting rid of it the better.

Washing out the Mold

If you find mold in your clothing, don’t wait to treat it! Basic cotton t-shirts, shirts, pants, socks and underwear are the easiest to tackle. First, wear plastic gloves and remove the clothing from the home. Take a sponge or old wash cloth and remove as much of the mold growth off the material as you can. Bring the clothes back inside and separate the lights and darks as you normally would for a regular wash. Bleach is one of the oldest remedies for mold removal – and works well on certain items (including cotton clothing). Do a load of laundry using hot water and your regular detergent. Once the washing machine has filled up with water, then add a cup of bleach. Color-safe bleach is also an option, though it might not work as well in certain instances. Whenever you are washing mold out of clothing, it is most effective to wash them through two complete cycles.

Bleach does not work for all materials – and can stain or fade certain pieces. A popular alternative for fighting mold is white distilled vinegar. (Vinegar can kill 82% of mold species.) It is especially effective in treating cotton blends, linen and polyester. Pouring a cup of vinegar into the wash will help rid most clothing of mold. But be mindful of the care directions for bright clothing and “hand wash only” pieces. Other ingredients used for getting rid of mold are borax, lemon juice – or a combination of baking soda and hydrogen peroxide. Make sure run the clothes through two full cycles. Again, these remedies are most effective in the early stages of mold infestation. If the mold has started breaking down the fabric and eating through it, it’s best to throw the piece away.

After you have washed your clothes, you will want to dry them immediately. The ideal drying method would be hanging the clothing outside on a clothesline. The sunlight is ideal for treating and eradicating mold as well.

Dry Clean Only

Most people own a few pieces of clothing that are “dry clean only.” If you own garments that are contaminated by mold and can’t be washed at home – send them out immediately. The heat used in the dry cleaning process is an effective way to rid fabric of mold as well. If you have other pieces of contaminated clothing that proved difficult to clean, you might consider sending them to the dry cleaners. This is the most expensive solution, but necessary for some materials – especially for silk and complicated blends.

Summer Mold Strategy

It’s not always possible to wash your damp clothing immediately. In the heat of the summer especially, your clothes are going to experience some kind of sweat-related dampness. The best way to combat mold growth is to line dry any clothing that gets damp before throwing it into the hamper. Even laying clothing out overnight and letting it air dry will help keep mold from appearing on material. The key here is to be proactive, which is sometimes difficult after coming home from the sweltering heat. Always dry damp clothing that is destined for the clothes hamper and avoid destructive mold growth.

Dangers of Mold

Sometimes mold can start growing on clothing without any obvious signs. An undetectable mold spore outbreak is just as hazardous as one that is visible. Breathing in spores can cause allergic reactions including sinus problems, runny eyes and skin rashes. Mold in your clothing can also contaminate the air; affecting the indoor air quality and even spurring growth in other areas of the home. Be mindful of the summer heat and the state of your clothing once you come home. By taking a few precautions with sweaty materials, you should be able to successfully bypass mold contamination.

RestoPros is the DFW leader in mold damage restoration and remediation. If you have any problems with mold in your home, don’t hesitate to give us a call. Our trained and licensed technicians can assess your problem and offer safe, effective solutions for recovery. Call 855-587-3786 to schedule an appointment today!

Related Blogs:

Healthy Humidity Levels in the Summer

5 Natural Cleaning Methods for Small Mold Spots

Don’t forget to follow RestoPros on Facebook, Twitter, LinkedIn, and Google+ for new Updates, News, and Discounts.

 

 

Removing Mold Odor with Sunlight

Published on

There are several ways that mold can wreak havoc on your home. Sometimes the problems aren’t as invasive as an outbreak inside your walls or ceiling. Sometimes the problems are more of a nuisance, requiring more of a DIY approach to the solution. If you live in an older home that has a musty smell, you may have encountered a problem with clothing or items made with fabric that start to smell of mold. This can happen in any residence; a new apartment or home as well as an older structure.

Items that are stored for a long time in a confined space can sometimes generate a moldy, musty smell that is extremely difficult to remove. Sometimes these are items (such as leather goods, baseball caps, sweaters and jackets) that are not feasible to put in the washing machine. Bath towels and washcloths can also develop a “mold creep” that sets in the fabric and isn’t noticeable until wet. This problem is even harder to deal with when using the regular methods of cleaning.

One of the easiest, greenest and most effective ways to completely remove that smell from clothing, towels and other items is to harness the power of sunlight. Hanging them on a clothesline (fixed or makeshift) throughout a dry, sunny day can work miracles This can sometimes be a tricky endeavor in the Dallas summer when the air is high in humidity. A hot, humid day might even exacerbate the mold growth – and odor. Make sure to check the weather forecast before you hang out any items for the day.

Try this method with fabric and leather items that have a distinctive odor. For pieces that have mold growing on them, you might simply consider getting rid of them.

  1. Choose a day with a forecast of sunny and dry (both elements are essential in this equation). Then start early in the morning to ensure you have the full day.
  2. Use gloves and, depending on the amount of items and the level of mold, a face mask to gather all of the items and take them outside. Using a clean, dry cloth, wipe the items off thoroughly.
  3. If you are also attempting to get rid of that mold smell on bath towels, they will need to be washed first on a warm cycle.
  4. Hang the items carefully on a clothesline – making sure that it is located in an area that will receive maximum sunlight all day. There should be sufficient room between each item to allow a breeze to effectively help dry out the fabric.
  5. Hang large bath towels lengthwise on the line.
  6. At the end of the day, smell the items to see if there are any lingering odors. Unless the mold contamination was extreme, the smell should have disappeared.
  7. If you can still smell mold, hang the items on a line again the following morning.
  8. Make a 1:1 mixture of water and white vinegar and gently spray everything before leaving them out again in the sun.
  9. Your clothing and towels should smell great at the end of the day.

Note:  Some pieces of clothing, including brightly colored fabrics, might fade in the direct sunlight. Be mindful of care instructions for each piece. Some might need to be professionally cleaned.

RestoPros is dedicated to keeping mold out of your home – and your life. From mold testing to remediation, our trained and licensed technicians can help eradicate its presence. If you ever find yourself dealing with more than mold odor in your clothing, contact our team! Call 855-587-3786 to schedule an assessment today!

Related Blogs:

5 Natural Cleaning Method for Small Mold Spots

How to Freshen Air After Mold

 

Removing Mold from Clothes

Published on

Removing Mold from ClothesMold survives and thrives when there’s humidity, warmth and food.  Almost nowhere are these three things in as great a supply as in your laundry.  Whether it’s because you left the hamper for too long after tossing in a wet towel, or simply forgot that you’d already run the washing machine, wet clothes are a breeding ground for mold.  But you should never just reach for the bleach when you find mold on your clothes.

Mold grows easily on clothes because clothes are mostly food-ready surface area.  Fabrics that are bundled up in storage or in a laundry hamper are a smorgasbord for rapid mold growth.  The sooner you act, the more likely you are to be able to save the fabric involved.  But bear in mind that most of the time, if the mold is advanced enough in its growth, there’s little that can be done to save mold-infested clothing (whether it’s a favorite shirt or those curtains you’ve had in the garage since your last move).

Cleaning

First, you should always wear a protective mask and gloves when cleaning mold.  Mold spores are airborne and can act as soft-tissue (eye, nose, or lung) irritants and inflame allergies in sufficient quantities.

When cleaning up mold, remove as much of the surface mold as you can.  Brush off loose or encrusted mold from the fabric.  Be sure to take care of this step outside to prevent spreading mold in your home or through your ventilation system. Since you should already be outside, hang up or lay out the clothing in the sun.  Ultraviolet light is devastating to organic life and will both kill and dry out mold.

When you’re ready to wash, pre-soak the fabric in cold water and wash with hot water and detergent.  Do not wash moldy clothes with other clothes.  Always finish by drying the clothing in the sun rather than an electric dryer.

If, after you’ve finished cleaning the fabric thoroughly, there is still a mold-stain present, then sponge at it with bleach diluted with water.  Lemon juice and a salt solution will also work as a bleach substitute, and is less harsh than bleach in many cases.

Vinegar – the Miracle Cleaner

Vinegar is useful for cleaning in many circumstances.  In fact, it’s often the best solution and is less likely to cause as much damage as harsher chemicals.  If you’re having issues with mold, stains, and smells, run a pre-soaked load of laundry with warm water and ¾ of a cup of white vinegar.  The vinegar will clear away the smell and, with enough washing, will kill and remove the mold as well.  Just be sure to wash once again with detergent and then air-dry the clothing before returning it to the rack, drawer, or box it was stored in initially.

One final alternative is to use a mildicide to clean up the mold.  Be cautious when choosing to use this method and always follow the listed instructions exactly.  Because of the harsh chemicals involved, failing to follow directions can lead to injury or damaged fabrics and clothing.

Don’t forget to follow RestoPros on Facebook, Twitter, LinkedIn, and Google+ for new Updates, News, and Discounts!